Who makes Marley cooling towers?

Who makes Marley cooling towers?

SPX Cooling Technologies
SPX Cooling Technologies offers a full line of quality options for your specific cooling requirement. Our current brands, Marley, Recold and SGS, represent the best-of-breed in wet and dry cooling, cooling towers and air cooled heat exchangers, parts and service as well as our legacy brands and acquired businesses.

How does a Marley cooling tower Work?

Nozzles – Crossflow configuration permits the use of a gravity-flow distribution system with a nozzle such as the Marley ST. With this system, the supply water is elevated to hot water distribution basins above the fill and then flows over the fill (by gravity) through nozzles located in the distribution basin floor.

What is the life expectancy of a cooling tower?

Cooling Tower Replacement can be a costly proposition and the average life expectancy of a commercial cooling tower, according to most manufacturers, is 15 – 20 years*, before they need to be rebuilt or replaced. Many cooling towers were installed in 1980’s and are 30 years old now.

What do cooling towers do?

A cooling tower is designed to remove heat from a building or facility by spraying water down through the tower to exchange heat into the inside of the building.

What are the different types of cooling tower?

There are three main types of cooling towers that are defined by how water or air pass through them. These types include crossflow, counterflow, and hyperbolic. There are also two varieties classified solely on airflow, known as induced draft and passive draft cooling towers.

What process is involved in the cooling tower?

Cooling tower systems work by using water to extract waste heat from a system and ejecting it into the atmosphere primarily through evaporation. The water is then distributed over the top of the cooling tower where air travels past the warm water causing a portion of the water to evaporate.

Is a cooling tower a condenser?

Cooling towers and condensers both heat exchanger equipment but operate in opposite ways. Condensers turn a substance from gas to liquid by way of cooling it (with either air or water that would come from a cooling tower).

How much does it cost to replace a cooling tower?

Cooling towers generally cost around $125,000 to fully replace. A replacement will typically cost between $50,000 and $200,000. A commercial cooling tower can last up 20 years.

How much does it cost to clean a cooling tower?

Costs for Cooling Tower Cleaning and Disinfection Typically cooling tower cleaning packages will cost you somewhere between $5,000 – $15,000. Costs can fluctuate based on: Amount of remediation necessary. Size and complexity of systems.

What are three types of cooling towers?

Do chillers need a cooling tower?

Air cooled chillers will use fans to blow cool ambient air over their condenser to remove heat from the system, this type does not use a cooling tower. The water cooled chiller has two large cylinders, one is called the evaporator and the other is called the condenser.

Why Marley cooling towers?

Marley towers are the only package cooling towers tested per CTI ATC-128 test code by third-party CTI-licensed test agents and certified acoustical engineers. NC sound levels are independently verified to meet published sound levels. Lowest Drift Rates.

What is the highest capacity cooling tower on the market?

Engineering Data and Technical Reference for Marley NC cooling towers. The NC is now the highest capacity package cooling tower on the market, ranging from 101 to 1455 tons! The NC is the result of extensive design studies focused on cooling tower sound control.

What can the cooling tower be shipped in pieces?

The cooling tower can also ship in pieces for assembly on site. Two large access doors provide non-confining, quick visual inspection of cold water basin, internal structure, drift eliminators and mechanical equipment in the plenum area.