How fast is a Yamaha RD400?
How fast is a Yamaha RD400?
The RD400 is a 399 cc (24.3 cu in) two-stroke air cooled six-speed motorcycle produced by Yamaha from 1976 until 1979….Yamaha RD400.
| 1978 Yamaha 400 DX | |
|---|---|
| Manufacturer | Yamaha Motor Company |
| Bore / stroke | 64 mm × 62 mm (2.5 in × 2.4 in) |
| Compression ratio | 6.2:1 |
| Top speed | 106.8 mph (171.9 km/h) |
How much does a Yamaha RD400 weigh?
Yamaha RD400 measures 1995mm in length, 760mm in width and 1060mm in height. The wheelbase measures 1320mm while seat height on the model is 800mm. The ground clearance for the model is 150mm. The dry weight for the motorcycle is 165.5 kg while wet weight tips the scale at 171 kg.
How much is a Yamaha RD400 worth?
Values
| Excellent | $10,515 |
| Very Good | $7,100 |
| Good | $4,125 |
| Fair | $2,085 |
| Poor | N/A |
How fast is a Yamaha rd350?
105 mph
Yamaha RD350
| Manufacturer | Yamaha Corporation |
|---|---|
| Compression ratio | 6.6 : 1 |
| Top speed | 105 mph (169 km/h) |
| Power | 39 bhp (29 kW) @ 7,500 rpm |
| Ignition type | dual coils, breaker points |
What kind of engine does a Yamaha RD400 have?
The RD400 is a 399 cc (24.3 cu in) two-stroke air cooled six-speed motorcycle produced by Yamaha from 1976 until 1979. It evolved directly from the Yamaha RD350 The 350 evolved into the RD400C in 1976, the “D” and “E” in ’77–’78 and the final model, the white 1979 RD400F.
Are new emissions laws coming for the Yamaha RD400?
Still, tough new emissions laws are waiting in the wings. Yamaha seems prepared to deal with the problem because there will be a 1979 RD400. But Yamaha’s faith in this motorcycle must be matched by renewed public enthusiasm for this company’s interpretation of two-stroke performance. Because if RD400 sales continue to decline.
What are the problems with the RD400?
The only glitch in the RD400’s performance is a tendency to surge at lightly-loaded cruising speeds. It’s particularly annoying while riding in traffic. The only remedy is to accelerate slightly or shift into a higher gear to increase engine load.
When did the Honda RD400 come out in the US?
(The model year for the first RD400, which was sold in the U.S. in the summer of 1975, was 1976.) The brakes were single disc front and rear. It could complete a standing quarter-mile in 14.01 seconds. The RD400C was the first motorcycle by a major manufacturer to be fitted with cast wheels.